CHRYSLER Cupped Prop Outboards Spline FP-486 13P 65 60HP

( Manufacturer Part Number: FP486 ), ( Part Type: Hp Prop ), ( Propeller Rotation: Standard )

Review CHRYSLER Inch Cupped Prop 65 Hp 60hp Outboards Spline fits FORCE 2010–2013

The **Chrysler FP486 FP-486 10" 13P Cupped Propeller** is a meticulously engineered marine propeller designed for high-performance outboard applications, specifically tailored to maximize efficiency and power delivery in engines producing between **60 and 65 horsepower** while maintaining a **13-spline shaft** interface. Crafted from high-grade stainless steel, this propeller features a **10-inch diameter** with a **cupped blade design**, which enhances thrust efficiency by reducing cavitation and improving water flow around the blades. The **FP486 designation** indicates an optimized pitch and blade angle, making it ideal for boats requiring a balance of speed and torque, such as fishing vessels, personal watercraft, or small cruisers. The **65 HP rating** ensures it can handle the power output of mid-range outboards without excessive wear, while the **Force 60 HP compatibility** underscores its versatility for engines in that performance range. With its **three-blade configuration**, the propeller delivers smooth acceleration, reduced vibration, and improved fuel economy, making it a reliable choice for both recreational and light-duty applications. Whether used in a high-speed runabout or a utility boat, this propeller s precision engineering ensures optimal performance, durability, and a seamless power transfer from engine to water.

The Chrysler FP486 FP-486 (10" x 13" propeller) with cupped blades, rated for 65 HP inboard and 60 HP outboard, is a mid-range propeller designed for general boating, fishing, and light cruising applications. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of the Chrysler FP486 FP-486 Propeller**

1. **Versatility for Light to Moderate Power**

The FP486 is well-suited for engines in the 60 75 HP range, making it a practical choice for small to mid-sized boats (e.g., bass boats, center consoles, or runabouts). It balances efficiency and maneuverability, which is ideal for anglers or recreational boaters who need both speed and control.

2. **Good Efficiency for Cruising and Fishing**

The cupped blade design enhances thrust and reduces cavitation, improving performance in moderate loads. This makes it effective for sustained cruising speeds (15 25 mph, depending on boat size and engine) without excessive wear. The 10" x 13" pitch is a common size for boats where you want a balance between acceleration and top-end speed.

3. **Durability for General Use**

Chrysler propellers are known for their stainless steel construction, which resists corrosion better than aluminum in saltwater environments. The FP-486 is designed for moderate abuse, making it a durable option for everyday use, though it s not built for extreme high-performance or heavy-duty applications.

4. **Affordable Compared to High-Performance Props**

Relative to high-efficiency or racing props, the FP-486 is cost-effective. It won t break the bank while still delivering reliable performance for its intended power range. This makes it a budget-friendly upgrade for boaters who want better efficiency than stock props without investing in a premium model.

5. **Easy to Find and Replace**

As a widely available propeller, the FP-486 is easy to source from marine supply stores, online retailers, or Chrysler dealers. Replacement parts and installation tools are also commonly available, reducing downtime if damage occurs.

6. **Decent Maneuverability**

The cupped blade shape helps with directional control, making it easier to turn and stop compared to flat or slightly cupped props. This is beneficial for fishing boats where quick direction changes are necessary.

7. **Compatibility with Stock or Upgraded Engines**

The 60 65 HP rating means it works well with stock outboards or inboard engines in this power bracket, as well as lightly upgraded setups. It s a good "middle ground" prop for boaters who haven t invested in a high-performance engine yet but want better performance than a stock prop.

---

### **Cons of the Chrysler FP486 FP-486 Propeller**

1. **Limited Performance for High-Speed or Heavy Loads**

The FP-486 is not optimized for high-performance applications (e.g., wakeboarding, planing at high speeds, or towing heavy loads). In these scenarios, a prop with a higher pitch (e.g., 12" x 14" or larger) or a more aggressive blade design would be more efficient. The 10" x 13" pitch may feel sluggish in planing boats or when pushing heavier boats at higher speeds.

2. **Not Ideal for Extreme Conditions**

While durable, the FP-486 is not designed for rough water or heavy-duty use (e.g., frequent grounding, towing large trailers, or high-impact fishing). In such conditions, a heavier-duty prop (e.g., a 16-pitch or 18-pitch model) with thicker blades would be more appropriate.

3. **Potential for Cavitation at Higher Speeds**

The cupped design helps reduce cavitation, but it s not perfect. In larger boats or with higher horsepower engines, cavitation can still occur, leading to noise and reduced efficiency. For boats pushing 75 HP, a more aggressive prop might be needed.

4. **Spline Compatibility Issues**

The 13-spline shaft rating is standard for many outboards and inboards, but compatibility depends on the engine s specific shaft diameter and spline count. Some older or non-standard engines may not fit perfectly, requiring an adapter or custom fitting. Always verify spline compatibility before purchasing.

5. **Less Efficient Than Custom or High-End Props**

For boaters who prioritize maximum speed and fuel efficiency, a custom-propeller design (e.g., from brands like Mercury, Volvo Penta, or custom prop makers) will outperform the FP-486. These props are tuned for specific engine/boat combinations, offering better thrust and reduced drag.

6. **Blade Wear Over Time**

Like all propellers, the FP-486 will experience wear from debris, corrosion, or improper use. The cupped blades may lose their shape over time, reducing efficiency. Regular inspections and maintenance are necessary to ensure optimal performance.

7. **Not Suitable for Deep-V or High-Performance Planing Boats**

Deep-V hulls or planing boats require props with higher pitch and more aggressive blade angles to achieve and maintain plane. The FP-486 s moderate pitch may not provide enough lift for these applications, leading to poor acceleration and top-end speed.

---

### **Conclusion**

The Chrysler FP486 FP-486 (10" x 13", cupped, 13-spline) is a solid, all-around propeller for boaters with engines in the 60 75 HP range who prioritize versatility, affordability, and moderate performance. It excels in general cruising, fishing, and light recreational use where high speed or extreme durability aren t critical. However, it falls short for high-performance applications, heavy loads, or boats requiring aggressive planing. If your primary use involves slow-speed maneuvering, fishing, or casual cruising, this prop is a practical and cost-effective choice. For boaters pushing higher speeds, towing, or operating in demanding conditions, a more specialized propeller would be a better investment.

---

### **Recommendation**

- You have a 60 75 HP engine in a small to mid-sized boat (e.g., bass boat, center console, or runabout).

- Your primary use is fishing, cruising, or light recreational boating at moderate speeds (15 25 mph).

- You want a durable, stainless steel propeller that s easy to find and replace without breaking the bank.

- Your boat isn t designed for high-speed planing or heavy loads.

- Your engine is significantly larger (80 HP) or you plan to upgrade soon. A higher-pitch prop (e.g., 12" x 14" or 13" x 15") would be more efficient.

- You frequently operate in rough water, tow heavy loads, or engage in high-impact activities. A heavier-duty prop (e.g., 16-pitch or 18-pitch) is better suited.

- You re in a deep-V hull or planing boat and need better acceleration and top-end speed. A custom or high-performance prop would be ideal.

- You want maximum fuel efficiency and speed. A custom-propeller design tailored to your engine/boat combo will outperform the FP-486.

If you choose the FP-486, inspect it regularly for pitting, corrosion, or blade damage. Clean it after saltwater use and store it properly to extend its lifespan. Consider having it professionally balanced if you notice vibration issues.

For most casual boaters in the 60 75 HP range, the FP486 is a reliable and practical propeller that delivers good value. However, if your boating needs are more demanding, investing in a prop better matched to your specific setup will yield better long-term results.

Details:

Brand: Chrysler. The pitch of the propeller is extremely important. Condition: Used. MPN: FP486 FP-486 P486.

Horse Power: 55-65. Part number: FP486 FP-486 P486. Casting Number: 486 13.

part #: fp486 prices

• $54.00-$124.99

specifications propboapar:

• for models: Force
• for makes: Chrysler
• for years: 2010-2013
• mpn: Fp486
• part type: Hp Prop
• propeller rotation: Standard

seller propboapar:

• rating: 99.7%
• # reviews: 29633
• city: Suamico, Wisconsin

payments propboapar:

• credit card: Mastercard
• wallet: Paypal
• other

returns propboapar:

• policy: No Returns

offer propboapar:

• started: April 15, 2026
• sold: 0
• availability: In Stock
• options: Ship-to-home
• quantity: 1

shipping propboapar:

• transit: 3-9 Days
• service: USPS Ground Advantage, USPS Priority Mail, UPS Ground, UPS Next Day Air Saver
• cost: $18.00
• carrier: USPS, UPS
• type: Calculated
• class: Standard, Expedited, One-day

general propboapar:

• condition: Used
• Parts Accessories > Boat Parts > Propellers

Chrysler FP486 Is Similar To:

• 071036 48-fp685-3 071036 Force Ac2c6916 Chrysler (11.9% similar) 5 r 17248FP685-201SSPROP348FP685- x 17 . Part 48-FP685-3. 5 diameter x 17 pitch. Rh rotation, 13. Used rebuilt, genuine force mercury quicksilver black max aluminum propeller. FP685-3 item super session chain:clasped Numbers's leaflets 148FP685-300ACTBLKDMND 13. This is an original factory part, not...(October 21st, 2017)
• 072054 Michigan Wheel Pitch Rh Force Chrysler Us Marine (19.7% similar) This is a nos prop out of the box that fits chrysler force us marine outboards. This prop is 14 inches in diameter by 13 pitch right hand propeller with a 15 spline hub...(November 24th, 2018)
• 072055 Michigan Wheel Chrysler Force (22.8% similar) Is not our primary business and there a lot going on here year round. The paint is peeled but prop overall in good used shape and would perform just fine...(January 1st, 2018)
• 072072 Michigan Wheel Right Hand Prop Chrysler Force Outboard (31.1% similar) This is a new prop but as you can see in the pictures box was left out weather...(September 2nd, 2018)
• 072108 Fps625 072108 Force Ca4c6802 Chrysler (12.2% similar) Size - 13 x 19 part number oem FPS625 shaft 15 tooth rotation right hand material aluminum...(October 14th, 2017)
• 072122 Michigan Wheel Force Chrysler Propellor Fits To Hp (25% similar) This prop fits force and chrysler 9 and 5 hp engines...(April 4th, 2018)
• 072130 Michigan Wheel Propeller Chrysler Force Mercury Outboard Pitch (33.3% similar) The backside of prop measures inches. 65 diameter and 21 pitch right hand prop with a 15 spline hub for force mercury outboards. This prop is 12...(February 13th, 2019)
• 073006 Michigan Wheel Stainless Cupped Prop Chrysler Force (34.5% similar) The box is weathered but prop inside new. It is stamped SSC614-C and has a 13 spline hub...(October 17th, 2018)
• 074265 Michigan Wheel Prop Force Chrysler Fits Hp Motors (23.8% similar) Green 56 prop back WALL12 18. Shipping: is to the lower 48 states only. It is important to me. It fits hp motors from force chrysler us. It has 14 spline...(January 11th, 2019)
• 10229 Solas Pitch Aluminum Prop For Chrysler Hp Outboards (29.2% similar) Charger hp 115 std. It costs less than your old prop. Charger hp std. Pitch is the most important thing to know when asking questions. Every prop is thoroughly inspected to make certain it meets rigid quality standards. This means the exhaust is through snout only. This prop fits the following ...(March 11th, 2018)
• 10230 Solas Pitch Aluminum Prop For Chrysler Hp Outboards (29.2% similar) This prop fits the following chrysler force outboards with 15 tooth spline: 75 hp std. Charger hp 115 std. It costs less than your old prop. This means the exhaust is through snout only. Every prop is thoroughly inspected to make certain it meets rigid quality standards. Pitch is the most important ...(May 19th, 2018)