CHRYSLER A-286265 Outboard Propeller Prop 8HP

( Manufacturer Part Number: A-286265 ), ( Part Type: Propeller Prop ), ( Country Of Origin: United States )

Review CHRYSLER Outboard 8hp Propeller Prop

The **Chrysler A-286265 Outboard Motor** is a meticulously engineered, high-performance propeller-driven engine designed for compact watercraft, personal watercraft, or small recreational boats where precision and reliability are paramount. This model represents Chrysler s legacy of innovation in marine propulsion, delivering a compact yet robust 8-horsepower output that excels in both efficiency and maneuverability. Built with a focus on durability, the A-286265 features a lightweight yet sturdy aluminum construction, ensuring optimal power-to-weight ratio without compromising structural integrity. Its compact dimensions make it an ideal choice for tight spaces, allowing for easy installation on smaller boats or as a secondary propulsion system for larger vessels. The engine operates on a two-stroke cycle, delivering instant throttle response and smooth acceleration, which is particularly advantageous for quick starts, sharp turns, and high-speed bursts perfect for recreational use, fishing, or light duty applications.

At the heart of this outboard lies a precision-engineered propeller shaft and the **A-286265 propeller**, a carefully designed unit optimized for maximum thrust and efficiency. The propeller blades are crafted from high-grade marine-grade aluminum, balanced for minimal vibration and maximum fuel economy, ensuring prolonged engine life and reduced maintenance demands. The blade geometry is engineered to minimize cavitation and noise while maximizing water displacement, providing a balance between speed and fuel efficiency. The propeller s design also incorporates a slight rake angle, which enhances acceleration and reduces drag, making it ideal for both open-water cruising and tight, maneuverable conditions. The shaft itself is sealed with corrosion-resistant materials, protecting against saltwater erosion and ensuring longevity even in harsh marine environments.

For ease of use and accessibility, the Chrysler A-286265 is equipped with a straightforward control system, featuring a simple pull-start mechanism for quick ignition and an intuitive throttle trigger for precise speed control. The engine s compact size and streamlined design allow for easy handling during installation, with a universal mounting system that accommodates various boat configurations. Additionally, the A-286265 is engineered with an emphasis on fuel efficiency, delivering consistent performance with minimal fuel consumption, making it cost-effective for frequent use. Whether deployed on a small fishing boat, a personal watercraft, or as a supplementary engine for larger vessels, this outboard motor combines reliability, performance, and ease of maintenance, embodying Chrysler s commitment to delivering dependable marine propulsion solutions.

The **Chrysler A-286265 outboard motor** (an 8HP propeller-driven model) is a classic, older engine known for its simplicity and durability, particularly in small boats and fishing applications. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of the Chrysler A-286265 8HP Propeller Outboard**

1. **Reliability and Simplicity**

The Chrysler A-series engines, particularly older models like the A-286265, are known for their straightforward mechanical design. With minimal electronic components, they are less prone to complex failures compared to modern outboards. Many users report that these engines can last decades with basic maintenance.

2. **Affordability**

- **Purchase Cost:** Used Chrysler A-series engines are often inexpensive, especially when compared to newer outboards. A well-maintained A-286265 can be found for under $200, depending on condition.

- **Repair Costs:** Parts are widely available and cheap. Common issues like carburetor adjustments, spark plug replacements, or minor fuel system fixes are low-cost compared to modern outboards.

- **Fuel Efficiency:** At 8HP, this engine consumes very little fuel, making it cost-effective for small boats or trolling applications.

3. **Durability in Harsh Conditions**

Chrysler s older outboards were built to handle rough use, including saltwater exposure, without frequent failures. Many are still in service decades after purchase, particularly in fishing boats where they are run intermittently.

4. **Easy to Service and Modify**

- The engine is designed for DIY maintenance. Users can easily overhaul the carburetor, replace the impeller, or adjust the timing without specialized tools.

- The propeller-driven design (rather than a direct-drive shaft) means fewer wear points on the lower unit, reducing long-term maintenance needs.

- Some owners modify these engines for performance (e.g., upgrading the carburetor or exhaust) with minimal cost.

5. **Low Noise and Vibration**

Compared to modern outboards, the A-286265 runs quieter and with less vibration, which can be beneficial for stealth fishing or small boats where noise is a concern.

6. **Compatibility with Older Boats**

If you own a vintage or small boat that requires an 8HP engine, the Chrysler A-286265 is a practical and proven choice. It fits the power requirements of many older models without overpowering them.

7. **No Electronic Failures**

Unlike modern outboards with fuel injection, ECUs, or electronic ignition, the A-286265 has no complex electronics to fail. This makes it more reliable in extreme conditions (e.g., deep water, saltwater corrosion).

8. **Community and Support**

There is a dedicated community of Chrysler outboard enthusiasts who share knowledge on repairs, modifications, and restoration. Forums and YouTube tutorials make troubleshooting easier.

---

### **Cons of the Chrysler A-286265 8HP Propeller Outboard**

1. **Age and Wear**

- The engine is **decades old** (likely from the 1960s 1980s), meaning parts may be worn out or difficult to source if the engine is neglected.

- The propeller-driven design, while durable, can suffer from impeller wear over time, reducing efficiency.

- Rubber seals and gaskets may degrade, leading to leaks if not replaced regularly.

2. **Limited Power for Modern Use**

- At **8HP**, this engine is only suitable for small boats (e.g., dinghies, canoes, or trolling applications). It cannot handle larger loads, rough water, or high-speed use.

- If you need more power (e.g., for a kayak with a passenger or heavy gear), an 8HP engine will feel underpowered.

3. **Fuel System Issues**

- Older carburetors can become clogged with dirt, fuel varnish, or debris, leading to poor performance or stalling.

- The lack of modern fuel injection means the engine is more sensitive to fuel quality (e.g., ethanol-blended gas can cause carburetor problems).

4. **Emissions and Environmental Concerns**

- The engine is **not EPA-certified** and runs on a simple carburetor design, which can produce more emissions than modern outboards. If you re in an area with strict boating regulations, this may be a drawback.

- It lacks modern pollution controls, which could be an issue if used in protected waterways.

5. **Limited Availability of New Parts**

- While parts are still available, Chrysler (now part of Stellantis) has largely discontinued production of these older models. Finding OEM parts may require sourcing from specialty suppliers or used markets.

- Rebuilding kits are available, but they may not include all necessary components (e.g., some users report needing to source seals or gaskets separately).

6. **No Modern Safety Features**

- Automatic cut-off switches (for tipping over).

- Modern ignition systems (some older models use points, which wear out).

- Easy-start mechanisms (starting can be difficult in cold weather).

- There is no built-in low-oil shutdown, which could lead to engine damage if oil levels are ignored.

7. **Propeller Wear and Damage**

- The propeller is a single-piece unit and can bend or crack if it strikes debris. Replacing a bent propeller on an older engine can be costly compared to modern outboards with replaceable blades.

- The propeller-driven design means the engine must be lifted out of the water to access the lower unit for repairs, which can be cumbersome.

8. **No Warranty or Support**

- Since these engines are no longer in production, there is **no warranty** or manufacturer support. Any repairs are entirely the owner s responsibility.

- If the engine fails catastrophically (e.g., crankshaft failure), replacement parts may be hard to find.

9. **Resale Value**

- Older Chrysler outboards have **little to no resale value**. If you decide to sell, you ll likely recover only a fraction of what you paid.

10. **Incompatibility with Modern Boats**

- If you re considering upgrading your boat to a larger or more powerful engine in the future, the A-286265 may not be a good long-term investment. Modern outboards offer better performance and features.

---

### **Conclusion**

The **Chrysler A-286265 8HP propeller outboard** is a **great choice for specific use cases**, particularly if you need a **reliable, low-cost, and simple** engine for small boats, trolling, or fishing in calm waters. Its strengths lie in durability, ease of repair, and affordability. However, it is **not suitable for high-performance, modern, or heavily used applications** due to its age, limited power, and lack of advanced features.

If you prioritize **low maintenance, cost-effectiveness, and a no-frills engine**, this outboard is an excellent option. But if you need **modern reliability, emissions compliance, or higher power**, a newer outboard (e.g., Yamaha, Honda, or Evinrude) would be a better investment.

---

### **Recommendation**

- You have a **small boat** (e.g., canoe, dinghy, or trolling kayak) that requires minimal power.

- You **prefer simplicity and low cost** over modern features.

- You are **comfortable with basic maintenance** and don t mind occasional carburetor adjustments.

- You **don t plan to use the engine heavily** (e.g., occasional fishing trips rather than daily boating).

- You **enjoy the nostalgia and community** of older outboards.

- You need **reliable, high-performance power** for larger boats or rough water.

- You **can t commit to regular maintenance** (e.g., carburetor cleaning, oil changes, propeller checks).

- You **plan to keep the boat long-term** and want modern outboard features (e.g., fuel injection, easy start, emissions compliance).

- You **live in an area with strict boating regulations** that may penalize older, less efficient engines.

- You **want resale value or warranty support** this engine offers neither.

- **Yamaha 8HP or 10HP** (modern, reliable, fuel-injected, better emissions compliance).

- **Honda 8HP** (extremely durable, low maintenance, but more expensive).

- **Mercury 8HP** (affordable, decent performance, but less durable than Yamaha/Honda).

- **Used Evinrude 8HP** (if you find a well-maintained example with modern features).

- **Impeller condition** (should not be cracked or worn).

- **Carburetor cleanliness** (no varnish or debris).

- **Spark plug health** (should be clean and properly gapped).

- **Lower unit for leaks** (check for oil or coolant seepage).

- **Propeller integrity** (no bends

Details:

Its been premiered but it look like its Chrysler white underneath. I removed this from a poor condition 8HP Chrysler outboard. Couple little knocks but very usable. I don't know how to remove it from the gear and want break.

part #: a286265 price

• $50.00

specifications propboapar:

• for makes: Chrysler
• mpn: A-286265
• part type: Propeller Prop
• country of origin: United States

seller propboapar:

• rating: 100.0%
• # reviews: 3582
• city: Acton, California

offer propboapar:

• best offers: True
• availability: In Stock
• options: Ship-to-home
• started: April 23, 2026
• quantity: 1
• sold: 0

shipping propboapar:

• type: Calculated
• transit: 5-11 Days
• carrier: USPS
• service: USPS Ground Advantage
• class: Standard
• cost: $8.81

payments propboapar:

• credit card: Visa
• other
• wallet: Paypal

general propboapar:

• condition: Used
• Parts Accessories > Boat Parts > Propellers

returns propboapar:

• policy: No Returns

Chrysler A-286265 Is Similar To:

• 072068 Michigan Wheel Pitch Rh Chrysler Outboard To Hp (42.4% similar) This prop is inches in diameter by 13 pitch right hand propeller with a 14 spline hub. The box says this prop fits 45 to 60 hp chrysler outboards...(December 24th, 2018)
• 072072 Michigan Wheel Right Hand Prop Chrysler Force Outboard (34% similar) This is a new prop but as you can see in the pictures box was left out weather...(September 2nd, 2018)
• 072120 Michigan Wheel Propeller Fits Chrysler Sea King (32.3% similar) Hand written on the box is hp. This is a new nos prop in the factory box. The prop is 8 inches in diameter and 5 pitch right hand with a 9 spline hub...(November 25th, 2018)
• 072130 Michigan Wheel Propeller Chrysler Force Mercury Outboard Pitch (28.1% similar) The backside of prop measures inches. 65 diameter and 21 pitch right hand prop with a 15 spline hub for force mercury outboards. This prop is 12...(February 13th, 2019)
• 073006 Michigan Wheel Stainless Cupped Prop Chrysler Force (23.3% similar) The box is weathered but prop inside new. It is stamped SSC614-C and has a 13 spline hub...(October 17th, 2018)
• 074265 Michigan Wheel Prop Force Chrysler Fits Hp Motors (29.7% similar) Green 56 prop back WALL12 18. Shipping: is to the lower 48 states only. It is important to me. It fits hp motors from force chrysler us. It has 14 spline...(January 11th, 2019)
• 10229 Solas Pitch Aluminum Prop For Chrysler Hp Outboards (35.3% similar) Charger hp 115 std. It costs less than your old prop. Charger hp std. Pitch is the most important thing to know when asking questions. Every prop is thoroughly inspected to make certain it meets rigid quality standards. This means the exhaust is through snout only. This prop fits the following ...(March 11th, 2018)
• 10230 Solas Pitch Aluminum Prop For Chrysler Hp Outboards (35.3% similar) This prop fits the following chrysler force outboards with 15 tooth spline: 75 hp std. Charger hp 115 std. It costs less than your old prop. This means the exhaust is through snout only. Every prop is thoroughly inspected to make certain it meets rigid quality standards. Pitch is the most important ...(May 19th, 2018)
• 341265 Michigan Wheel Blade Aluminum Propeller For Hp Chrysler (33.6% similar) Shipping by USPS. I don't have the original box. Also on the side. I'm not sure if it was used or. Always happy to combine purchased items for savings on shipping. Does show some minor scuffs, scratches, dusty dirty. From a smoke free environment...(September 18th, 2018)
• 372205 Unbranded Aluminum Prop Fits Spline Chrysler (16.7% similar) I have no idea what it fits. I reserve the right to end listing early as have for sale locally. Sold as is where. Prop number 1491 in my inventory. Prop number 1491 in my inventory...(October 15th, 2018)
• 383265 Chrysler Marine Outboard Propeller (65.1% similar) They fit: 70HP - 130HP alum splinted pin drive. This propeller was new just out of box and because we were not sure its history it completely checked at Pitts service in Cincinnati. This is a rare prop only because the motors out lasted parts. You are looking at a rare oem chrysler marine outboard ...(November 10th, 2017)