EVINRUDE 177305 Propeller Rh 745419363420 H.o. 1/2 24P

( Manufacturer Part Number: 177305 ), ( Part Type: Propeller ), ( Propeller Pitch: 24 ), ( Propeller Rotation: Standard ), ( UPC: 745419363420 )

Review EVINRUDE Brp Raker.o. Stainless Propeller 1/2 24p Rh E tec fits 2014

The **Evinrude 177305 High-Octane (H.O.) Propeller, 14 " Blade, 24-Pitch, Right-Hand (RH) for E-TEC Engines** is a precision-engineered marine propeller designed to deliver exceptional performance, efficiency, and reliability for Evinrude E-TEC outboard motors. Crafted from high-quality, corrosion-resistant materials, this propeller is built to withstand the demands of both recreational and performance-driven boating applications, ensuring durability across a wide range of operating conditions. The **14 -inch blade diameter** strikes an ideal balance between acceleration and top-end speed, making it well-suited for mid-sized boats ranging from fishing vessels and cruisers to high-performance wakeboarders and personal watercraft tenders. The **24-pitch** measurement indicates a moderate blade angle, optimizing thrust and efficiency for moderate to high-rpm applications, which is particularly advantageous for E-TEC engines that emphasize smooth power delivery and fuel efficiency.

This **right-hand (RH) propeller** is specifically engineered to rotate in a clockwise direction when viewed from the rear of the boat, ensuring proper alignment with the E-TEC engine s drive shaft and maximizing power transfer. The **High-Octane (H.O.) designation** signifies that this propeller is designed for use with Evinrude s high-performance E-TEC engines, which are known for their advanced fuel injection systems and optimized power delivery. The **24-pitch blade** is finely tuned to enhance acceleration, reduce cavitation, and improve overall propulsion efficiency, allowing the engine to operate closer to its optimal power band while minimizing wear and tear. Whether you're accelerating quickly off the dock, maintaining steady cruising speeds, or navigating through choppy waters, this propeller ensures a seamless and responsive ride.

Constructed with **high-strength, corrosion-resistant materials**, the Evinrude 177305 propeller is designed to resist saltwater corrosion, oxidation, and mechanical stress, making it an excellent choice for both freshwater and saltwater environments. The **precision-machined blades** feature a smooth, aerodynamic contour that minimizes drag and maximizes thrust, while the **reinforced hub** ensures structural integrity under high loads. This propeller is compatible with a variety of E-TEC engine models, including those in the **E-TEC 90 250 HP series**, making it a versatile upgrade for boat owners seeking improved performance without sacrificing reliability. Whether you're looking to enhance acceleration, fuel efficiency, or overall handling, the **Evinrude 177305 H.O. Propeller** delivers a blend of cutting-edge engineering and rugged durability, ensuring a smoother, more powerful boating experience.

### **Pros and Cons of buying a Evinrude 177305 H.O. Propeller (14.5" x 24P RH for E-TEC)**

1. **Optimized for E-TEC Engines** This propeller is specifically designed for Evinrude E-TEC (Electronic Throttle Control) outboard motors, ensuring compatibility with the engine s electronic systems and throttle response. This can improve performance and reduce strain on the engine s components.

2. **High Performance in Certain Conditions** The 14.5" diameter and 24-pitch design is well-suited for mid-sized boats (typically 16 20 feet) running at moderate to high speeds. It balances speed and fuel efficiency, making it ideal for cruising, fishing, or light planing applications.

3. **Durable Construction** Evinrude propellers are generally made from high-quality materials, including stainless steel or aluminum alloys, which offer good resistance to corrosion and wear. This extends the propeller s lifespan, especially in saltwater environments if properly maintained.

4. **Easier Installation and Replacement** Being an OEM (Original Equipment Manufacturer) part, it fits seamlessly with E-TEC engines, reducing the risk of compatibility issues. It also comes with the necessary hardware for straightforward installation.

5. **Potential Fuel Efficiency** A properly matched propeller can improve fuel economy by reducing unnecessary strain on the engine. The 24-pitch design suggests it is optimized for smoother operation at cruising speeds rather than high-speed planing.

6. **Warranty Coverage** Purchasing from an authorized dealer or directly from Evinrude may include a warranty, providing peace of mind against manufacturing defects.

---

1. **Limited Use Case** This propeller is not ideal for high-performance or heavy-duty applications. If your boat is heavily loaded (e.g., with multiple passengers or heavy gear) or if you frequently operate at high speeds, a larger or more aggressive pitch propeller may be more suitable.

2. **Potential for Cavitation** In certain conditions (e.g., shallow water, high loads, or rough seas), the 14.5" diameter may not provide enough thrust, leading to cavitation (bubbles forming on the blades) and reduced efficiency. This can cause vibration, noise, and accelerated wear.

3. **Cost** As an OEM part, this propeller may be more expensive than aftermarket alternatives. While aftermarket options can sometimes offer similar performance at a lower cost, they may lack the same level of durability or warranty support.

4. **Not Universal** This propeller is specifically for E-TEC engines and may not fit other Evinrude models (e.g., E-TEC XD, E-TEC HP, or older E-TEC variants). Always verify compatibility before purchasing.

5. **Maintenance Requirements** Like all propellers, this one will require regular cleaning (especially in saltwater) and inspection for damage or corrosion. Neglecting maintenance can lead to reduced performance or failure.

6. **Potential for Over/Under-Matching** If your boat s engine is significantly more powerful than intended for this propeller, it may struggle to achieve optimal speed, leading to poor performance. Conversely, if the engine is underpowered, the propeller may not generate enough thrust.

---

The **Evinrude 177305 H.O. Propeller (14.5" x 24P RH for E-TEC)** is a solid choice for boat owners operating mid-sized E-TEC engines in moderate conditions, such as cruising, fishing, or light planing. Its OEM status ensures compatibility and reliability, while its design balances speed and fuel efficiency. However, it is not ideal for high-performance or heavily loaded applications, where a different propeller pitch or size may be more appropriate.

If your boat s primary use aligns with the propeller s intended performance range (e.g., a 16 20 ft boat with a 150 200 hp E-TEC engine), this is a worthwhile investment. For other setups, consulting an Evinrude dealer or propeller specialist to determine the best match for your specific engine and load is recommended.

---

- You have an E-TEC engine (verify model compatibility).

- Your boat is in the appropriate size range (16 20 ft).

- You primarily operate at cruising speeds (not high-speed planing).

- You want an OEM part with warranty support.

- Your boat is heavily loaded or frequently operates at high speeds (opt for a larger diameter or more aggressive pitch).

- You are on a tight budget (explore high-quality aftermarket options from reputable brands like Mercury, Lewmar, or Propeller Dynamics).

- You need a propeller for a non-E-TEC Evinrude engine (check the correct part number).

For the best results, always consult your boat s manual or an Evinrude dealer to confirm the ideal propeller for your specific setup. Regular maintenance and inspection will also extend the propeller s lifespan and performance.

Details:

Sadly only used twice. It does not come with the hub kit. Bought this prop brand new and used it twice. Mostly the edges are beat up with a few little bends that pictured.

Prop hit some rocks that the boat ramp loading on trailer.

part #: 177305 prices

• $300.00-$775.96

specifications propboapar:

• for makes: Evinrude
• for years: 2014
• mpn: 177305
• part type: Propeller
• propeller pitch: 24
• propeller rotation: Standard
• upc: 745419363420

seller propboapar:

• city: Valdosta, Georgia
• # reviews: 68
• rating: 100.0%

payments propboapar:

• credit card: Discover
• other
• wallet: Apple-pay

offer propboapar:

• quantity: 1
• options: Ship-to-home
• sold: 0
• best offers: True
• availability: In Stock
• started: March 10, 2026

general propboapar:

• Parts Accessories > Boat Parts > Propellers
• condition: Used

shipping propboapar:

• transit: 4-10 Days
• type: Fixed
• class: Standard
• cost: $25.00
• service: UPS Ground
• carrier: UPS

returns propboapar:

• policy: No Returns

Evinrude 177305 Is Similar To:

• 174983 Michigan Wheel Johnson Evinrude Propeller Splines (31.6% similar) It will do the job well. 9HP and 15HP is in very good condition. This Johnson evinrude propeller it does have some scratches in the paint from ordinary use...(February 11th, 2019)
• 011025 Michigan Wheel Match Aluminum Propeller For Evinrude Johnson (36.4% similar) Size - 14 x 19 part number oem shaft 13 tooth spline rotation right hand material aluminum of blades 3 condition new in box application cant find what you're looking for. The actual part may vary in appearance...(March 16th, 2018)
• 011027 Michigan Wheel Johnson Evinrude Pitch Prop Propeller Replaces Omc Bpr (31.6% similar) Clean, quality, inspected parts...(July 18th, 2018)
• 011104 Michigan Wheel Evinrude Johnson Propeller Cobra Mi Prop (37.7% similar) 5l 120 hp 1980 . 5l 120 hp and NEWER1 NEWER50 2 Cl. Thru 3l 128 hp. Pleasure hp e-tec and NEWER45 2 Cl. Commercial quality aluminum alloy for strength and durability. 1986 and NEWER60 hp e-tec. Commercial and NEWER50 hp e-tec newer our part number oem, x 19 rh 3 blade AL match propeller thru hub ...(April 3rd, 2018)
• 0114848 Omc New In Box Oem Evinrude Johnson Propeller 745419000134 (35.2% similar) A brand new sealed in package evinrude Johnson prop model and size...(June 6th, 2019)
• 0115299 Johnson Evinrude Omc Brp Blade Aluminium Propeller (43.3% similar) MC- Johnson evinrude nos 3 blade aluminium propeller. It is a brand new propeller and has never been used. I didn't want to open the bag so pictures aren't best but that is original...(March 9th, 2018)
• 012033 Michigan New Johnson Evinrude Aluminum Propeller (32.1% similar) I only ship sell to the us. Item: 012033SIZE: x 14 free shipping. See pictures for details...(September 25th, 2018)
• 012050 Michigan Wheel Johnson Evinrude Propeller Pitch (32.3% similar) Part: 011003 prices...(April 21st, 2018)
• 012068 Michigan Wheel Pitch For Omc Evinrude Johnson (18.8% similar) New condition DOA. 5 pitch aluminum fits MC evinrude Johnson outboards with pin drive shaft. New in the box I also do propeller repair at reasonable prices...(April 13th, 2019)
• 012086 Michigan Wheel Propeller For Evinrude Johnson (34.4% similar) Edges are not perfect but can be cleaned up. Check my other listings for old and rare parts. This is a good used prop...(July 23rd, 2018)
• 0125990 Omc Evinrude Mate Johnson Colt Antique Outboard Motor Propeller Pin (31.8% similar) Its diameter by 4 pitch. In the original parts lists MC part number is there are lots of these antique outboard motor propellers listed on now. 5HP mate and colt motors. This is what mine fits: evinrude and Johnson 1968 to it will fit work on the 2HP eliminate costly problematic hub cushion. As ...(December 13th, 2018)